BUNU KULLANABİLİRMİYİM DESTEK VERİRSENİZ SEVİNİRİM.
strategy("Backtesting 3commas DCA Bot v2", overlay=true, pyramiding=99, process_orders_on_close=true, commission_type=strategy.commission.percent, commission_value=0.1, initial_capital=1094.56)
// Important Note : Initial Capital above is written to match the default value based on bot parameters.
// It is expected the user will update the initial_capital via the GUI Parameters > Properties tab
// A warning will displayed in case initial capital and max amount for bot usage do not match.
// ----------------------------------
// Strategy Inputs
// ----------------------------------
take_profit = input(3.0, type=input.float, title="Take Profit (%)", minval=0.0, step=0.1)/100
take_profit_type = input(defval="% from total volume", title="Take Profit Type", options=["% from total volume", "% from base order"])
ttp = input(0.5, type=input.float, title="Trailing Take Profit (%) [0 = Disabled]", minval=0.0, step=0.1)/100
stop_loss = input(0.0, type=input.float, title="Stop Loss (%) [0 = Disabled]", minval=0.0, step=0.1)/100
order_size_type = input(defval="Fixed", title="Order Size Type", options=["Fixed", "% of equity"])
base_order = input(100.0, type=input.float,title="Base Order")
safe_order = input(140.0, type=input.float,title="Safety Order")
max_safe_order = input(4, title="Max Safety Trades Count", minval=0, maxval=99, step=1)
price_deviation = input(2.0, type=input.float, title="Price deviation to open safety order (%)", minval=0.0, step=0.1)/100
safe_order_volume_scale = input(1.4, type=input.float, title="Safety Order Volume Scale", step=0.1)
safe_order_step_scale = input(1.5, type=input.float, title="Safety Order Step Scale", step=0.1)
dsc = input(defval="RSI-7", title="Deal Start Condition", options=["Start ASAP", "RSI-7", "TA Presets"])
dsc_rsi_threshold = input(defval=30, title="[RSI-7 only] RSI Threshold", minval=1, maxval=99)
dsc_technicals = input(defval="Strong", title="[TA Presets only] Strength", options=["Strong", "Weak"])
dsc_res = input("", title="[RSI-7 and TA Presets Only] Indicator Timeframe", type=input.resolution)
bot_direction = input(defval="Long", title="Bot Direction", options=["Long", "Short"])
start_time = input(defval=timestamp("1 May 2021 06:00"), title="Start Time", type=input.time)
end_time = input(defval=timestamp("31 Dec 2021 20:00"), title="End Time", type=input.time)
// ----------------------------------
// Declarations
// ----------------------------------
var bo_level = 0.0
var last_so_level = 0.0
var so_level = 0.0
var ttp_active = false
var ttp_extremum = 0.0
var ttp_level = 0.0
var stop_level = 0.0
var take_profit_level = 0.0
var deal_counter = 0
var stop_loss_counter = 0
var stop_loss_on_bar = false
var latest_price = close
var deal_start_condition = false
var start_time_actual = start_time
var end_time_actual = start_time
// CONSTANTS
var float init_price = na
var IS_LONG = bot_direction == "Long"
// ----------------------------------
// Utilities functions
// ----------------------------------
pretty_date(t) => tostring(dayofmonth(t)) + "/" + tostring(month(t)) + "/" + tostring(year(t))
within_window() => time >= start_time and time <= end_time
base_order_size() => order_size_type == "Fixed" ? base_order : base_order/100 * strategy.equity
safe_order_size() => order_size_type == "Fixed" ? safe_order : safe_order/100 * strategy.equity
safety_order_deviation(index) => price_deviation * pow(safe_order_step_scale, index - 1)
safety_order_price(index, last_safety_order_price) =>
if IS_LONG
last_safety_order_price * (1 - safety_order_deviation(index))
else
last_safety_order_price * (1 + safety_order_deviation(index))
safety_order_qty(index) => safe_order_size() * pow(safe_order_volume_scale, index - 1)
max_amount_for_bot_usage() =>
var total_qty = 0.0
var last_order_qty = 0.0
total_qty := base_order_size()
last_order_qty := safe_order_size()
if max_safe_order > 0
for index = 1 to max_safe_order
total_qty := total_qty + safety_order_qty(index)
total_qty // returned value
max_deviation() =>
var total_deviation = 0.0
total_deviation := 0.0
for index = 1 to max_safe_order
total_deviation := total_deviation + safety_order_deviation(index)
currency_format() =>
if syminfo.currency == "USDT" or syminfo.currency == "USD" or syminfo.currency == "TUSD" or syminfo.currency == "BUSD" or syminfo.currency == "USDC" or syminfo.currency == "EUR" or syminfo.currency == "AUD"
"#.##"
else if syminfo.currency == "BTC"
"#.########"
else
// TODO (rouxam) list more options
"#.####"
bot_setup_string() =>
var ret = ""
ret := "Deal Start Condition: " + dsc + "\n"
if ttp > 0.0
ret := ret + "TTP: " + tostring(take_profit, "#.##%") + "(" + tostring(ttp, "#.##%") + "), "
else
ret := ret + "TP: " + tostring(take_profit, "#.##%") + ", "
ret := ret + "BO: " + tostring(base_order, currency_format()) + " " + (order_size_type == "Fixed" ? "" : "% ") + syminfo.currency + ", "
ret := ret + "SO: " + tostring(safe_order, currency_format()) + " " + (order_size_type == "Fixed" ? "" : "% ") + syminfo.currency + ", "
ret := ret + "OS: " + tostring(safe_order_volume_scale) + ", "
ret := ret + "SS: " + tostring(safe_order_step_scale) + ", "
ret := ret + "SOS: " + tostring(price_deviation, "#.##%")
if stop_loss > 0.0
ret := ret + ", " + "SL: " + tostring(stop_loss, "#.##%")
ret := ret + "\n"
// ***********************************
// Deal Start Condition Strategies
// ***********************************
// RSI-7
// ***********************************
rsi_signal() =>
// Regular strat would be crossover but not for 3C DCA Bot
rsi7 = rsi(close, 7)
if IS_LONG
[rsi7 < dsc_rsi_threshold, close]
else
[rsi7 > dsc_rsi_threshold, close]
// TA Presets
// ***********************************
// This whole section is from the TradingView "Technical Ratings" code.
// Adding the Technical Ratings "indicator" as input to this "strategy" is not sufficient for our purpose,
// Therefore the code is copy-pasted.
// ***********************************
// Awesome Oscillator
AO() =>
sma(hl2, 5) - sma(hl2, 34)
// Stochastic RSI
StochRSI() =>
rsi1 = rsi(close, 14)
K = sma(stoch(rsi1, rsi1, rsi1, 14), 3)
D = sma(K, 3)
[K, D]
// Ultimate Oscillator
tl() => close[1] < low ? close[1]: low
uo(ShortLen, MiddlLen, LongLen) =>
Value1 = sum(tr, ShortLen)
Value2 = sum(tr, MiddlLen)
Value3 = sum(tr, LongLen)
Value4 = sum(close - tl(), ShortLen)
Value5 = sum(close - tl(), MiddlLen)
Value6 = sum(close - tl(), LongLen)
float UO = na
if Value1 != 0 and Value2 != 0 and Value3 != 0
var0 = LongLen / ShortLen
var1 = LongLen / MiddlLen
Value7 = (Value4 / Value1) * (var0)
Value8 = (Value5 / Value2) * (var1)
Value9 = (Value6 / Value3)
UO := (Value7 + Value8 + Value9) / (var0 + var1 + 1)
UO
// Ichimoku Cloud
donchian(len) => avg(lowest(len), highest(len))
ichimoku_cloud() =>
conversionLine = donchian(9)
baseLine = donchian(26)
leadLine1 = avg(conversionLine, baseLine)
leadLine2 = donchian(52)
[conversionLine, baseLine, leadLine1, leadLine2]
calcRatingMA(ma, src) => na(ma) or na(src) ? na : (ma == src ? 0 : ( ma < src ? 1 : -1 ))
calcRating(buy, sell) => buy ? 1 : ( sell ? -1 : 0 )
ta_presets_signal() =>
//============== MA =================
SMA10 = sma(close, 10)
SMA20 = sma(close, 20)
SMA30 = sma(close, 30)
SMA50 = sma(close, 50)
SMA100 = sma(close, 100)
SMA200 = sma(close, 200)
EMA10 = ema(close, 10)
EMA20 = ema(close, 20)
EMA30 = ema(close, 30)
EMA50 = ema(close, 50)
EMA100 = ema(close, 100)
EMA200 = ema(close, 200)
HullMA9 = hma(close, 9)
// Volume Weighted Moving Average (VWMA)
VWMA = vwma(close, 20)
[IC_CLine, IC_BLine, IC_Lead1, IC_Lead2] = ichimoku_cloud()
// ======= Other =============
// Relative Strength Index, RSI
RSI = rsi(close,14)
// Stochastic
lengthStoch = 14
smoothKStoch = 3
smoothDStoch = 3
kStoch = sma(stoch(close, high, low, lengthStoch), smoothKStoch)
dStoch = sma(kStoch, smoothDStoch)
// Commodity Channel Index, CCI
CCI = cci(close, 20)
// Average Directional Index
float adxValue = na, float adxPlus = na, float adxMinus = na
[P, M, V] = dmi(14, 14)
adxValue := V
adxPlus := P
adxMinus := M
// Awesome Oscillator
ao = AO()
// Momentum
Mom = mom(close, 10)
// Moving Average Convergence/Divergence, MACD
[macdMACD, signalMACD, _] = macd(close, 12, 26, 9)
// Stochastic RSI
[Stoch_RSI_K, Stoch_RSI_D] = StochRSI()
// Williams Percent Range
WR = wpr(14)
// Bull / Bear Power
BullPower = high - ema(close, 13)
BearPower = low - ema(close, 13)
// Ultimate Oscillator
UO = uo(7,14,28)
if not na(UO)
UO := UO * 100
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
PriceAvg = ema(close, 50)
DownTrend = close < PriceAvg
UpTrend = close > PriceAvg
// calculate trading recommendation based on SMA/EMA
float ratingMA = 0
float ratingMAC = 0
if not na(SMA10)
ratingMA := ratingMA + calcRatingMA(SMA10, close)
ratingMAC := ratingMAC + 1
if not na(SMA20)
ratingMA := ratingMA + calcRatingMA(SMA20, close)
ratingMAC := ratingMAC + 1
if not na(SMA30)
ratingMA := ratingMA + calcRatingMA(SMA30, close)
ratingMAC := ratingMAC + 1
if not na(SMA50)
ratingMA := ratingMA + calcRatingMA(SMA50, close)
ratingMAC := ratingMAC + 1
if not na(SMA100)
ratingMA := ratingMA + calcRatingMA(SMA100, close)
ratingMAC := ratingMAC + 1
if not na(SMA200)
ratingMA := ratingMA + calcRatingMA(SMA200, close)
ratingMAC := ratingMAC + 1
if not na(EMA10)
ratingMA := ratingMA + calcRatingMA(EMA10, close)
ratingMAC := ratingMAC + 1
if not na(EMA20)
ratingMA := ratingMA + calcRatingMA(EMA20, close)
ratingMAC := ratingMAC + 1
if not na(EMA30)
ratingMA := ratingMA + calcRatingMA(EMA30, close)
ratingMAC := ratingMAC + 1
if not na(EMA50)
ratingMA := ratingMA + calcRatingMA(EMA50, close)
ratingMAC := ratingMAC + 1
if not na(EMA100)
ratingMA := ratingMA + calcRatingMA(EMA100, close)
ratingMAC := ratingMAC + 1
if not na(EMA200)
ratingMA := ratingMA + calcRatingMA(EMA200, close)
ratingMAC := ratingMAC + 1
if not na(HullMA9)
ratingHullMA9 = calcRatingMA(HullMA9, close)
ratingMA := ratingMA + ratingHullMA9
ratingMAC := ratingMAC + 1
if not na(VWMA)
ratingVWMA = calcRatingMA(VWMA, close)
ratingMA := ratingMA + ratingVWMA
ratingMAC := ratingMAC + 1
float ratingIC = na
if not (na(IC_Lead1) or na(IC_Lead2) or na(close) or na(close[1]) or na(IC_BLine) or na(IC_CLine))
ratingIC := calcRating(
IC_Lead1 > IC_Lead2 and close > IC_Lead1 and close < IC_BLine and close[1] < IC_CLine and close > IC_CLine,
IC_Lead2 > IC_Lead1 and close < IC_Lead2 and close > IC_BLine and close[1] > IC_CLine and close < IC_CLine)
if not na(ratingIC)
ratingMA := ratingMA + ratingIC
ratingMAC := ratingMAC + 1
ratingMA := ratingM
sayın yönetici
- Soruldu
- Kategori
- Algoritmik Trading
- Görüntülenme
- 925 görüntülenme
- Durum
- Cevap bekliyor
