1 beğenilme 0 beğenilmeme
372 kez görüntülendi
Merhaba SMA (3,5,8,10,12,14)'nın SMA(30,35,40,45,50,60)'yı yukarı aşagı kesmesi yani guppy nin system tester ve explorer tarama formülleri nedir acaba ??
System Tester-Bağlı Emirler kategorisinde (29 puan) tarafından | 372 kez görüntülendi

1 cevap

1 beğenilme 0 beğenilmeme
En İyi Cevap
merhaba,

aşağıdaki gibi yazdık,

bir dener incelersiniz,

hem expolorerda hemde sistem testerda çalışır

al için

a1:=mov(c,3,s)>mov(c,5,s) AND mov(c,5,s)>mov(c,8,s)  AND mov(c,8,s)>mov(c,10,s)  AND
mov(c,10,s)>mov(c,12,s)  AND mov(c,12,s)>mov(c,14,s) ;
a2:=mov(c,30,s)>mov(c,35,s) AND mov(c,35,s)>mov(c,40,s)  AND mov(c,40,s)>mov(c,45,s)  AND
mov(c,45,s)>mov(c,50,s)  AND mov(c,50,s)>mov(c,60,s) ;
(a1 and a2 and mov(c,14,s)>mov(c,30,s)) AND ref((a1 and a2 and mov(c,14,s)>mov(c,30,s)) ,-1)=0

 

sat için

 

a1:=mov(c,3,s)<mov(c,5,s) AND mov(c,5,s)<mov(c,8,s)  AND mov(c,8,s)<mov(c,10,s)  AND
mov(c,10,s)<mov(c,12,s)  AND mov(c,12,s)<mov(c,14,s) ;
a2:=mov(c,30,s)<mov(c,35,s) AND mov(c,35,s)<mov(c,40,s)  AND mov(c,40,s)<mov(c,45,s)  AND
mov(c,45,s)<mov(c,50,s)  AND mov(c,50,s)<mov(c,60,s) ;
(a1 and a2 and mov(c,14,s)<mov(c,30,s)) AND ref((a1 and a2 and mov(c,14,s)<mov(c,30,s)) ,-1)=0

bilgilerinize
(40,139 puan) tarafından
tarafından seçilmiş
0 0
Yazdığınız formüle if ile trent ekledim ama çalışmıyor sıfır veriyor. Bi ornek atabilirmisiniz müsaitseniz
0 0

merhaba,

size gönderdiğimiz sistem çalışmaktadır,

nasıl bir ekleme yapıyorsunuz,

detaylı yazıp egitim@matriksdata.com mail atarsanız inceleyelim,

bilgilerinize

 

0 0
Serkan Bey Selamlar,

Başka bi arkadaş sormuş soruyu ben ilave olarak yorum yaptım :)

İf le 2 bölge yapmaya çalıştım ama sıfır çıkıyor veya programı kapatıyor. And boşluklarına dikkat ettim. buraya attım diye boşluk kaybolmuş olabilir.

if(MOV(C,opt3,VAR)>OTT(C,opt3,opt4),
a1:=mov(c,3,s)>mov(c,5,s) AND mov(c,5,s)>mov(c,8,s) AND mov(c,8,s)>mov(c,10,s) AND mov(c,10,s)>mov(c,12,s) AND mov(c,12,s)>mov(c,14,s);a2:=mov(c,30,s)>mov(c,35,s) AND mov(c,35,s)>mov(c,40,s) AND mov(c,40,s)>mov(c,45,s) AND mov(c,45,s)>mov(c,50,s) AND mov(c,50,s)>mov(c,60,s);(a1 and a2 and mov(c,14,s)>mov(c,30,s)) AND ref((a1 and a2 and mov(c,14,s)>mov(c,30,s)),-1)=0,

MOV(C,opt3,VAR)>OTT(C,opt3,opt5) AND a1:=mov(c,3,s)>mov(c,5,s) AND mov(c,5,s)>mov(c,8,s) AND mov(c,8,s)>mov(c,10,s) AND mov(c,10,s)>mov(c,12,s) AND mov(c,12,s)>mov(c,14,s);a2:=mov(c,30,s)>mov(c,35,s) AND mov(c,35,s)>mov(c,40,s) AND mov(c,40,s)>mov(c,45,s) AND mov(c,45,s)>mov(c,50,s) AND mov(c,50,s)>mov(c,60,s);(a1 and a2 and mov(c,14,s)>mov(c,30,s)) AND ref((a1 and a2 and mov(c,14,s)>mov(c,30,s)),-1)=0)
0 0
merhaba,

tanımları dışarda bırakmanız gerekir

a1:=mov(c,3,s)>mov(c,5,s) AND mov(c,5,s)>mov(c,8,s) AND mov(c,8,s)>mov(c,10,s) AND mov(c,10,s)>
mov(c,12,s) AND mov(c,12,s)>mov(c,14,s);
a2:=mov(c,30,s)>mov(c,35,s) AND
mov(c,35,s)>mov(c,40,s) AND mov(c,40,s)>mov(c,45,s) AND mov(c,45,s)>mov(c,50,s) AND mov(c,50,s)>
mov(c,60,s);

if(MOV(C,opt3,VAR)>OTT(C,opt3,opt4),
(a1 and a2 and mov(c,14,s)>mov(c,30,s)) AND (a1 and a2 and mov(c,14,s)>mov(c,30,s)) AND ref((a1 and a2 and mov(c,14,s)>mov(c,30,s)),-1)=0,

MOV(C,opt3,VAR)>OTT(C,opt3,opt5) AND (a1 and a2 and mov(c,14,s)>mov(c,30,s)) AND ref((a1 and a2 and mov(c,14,s)>mov(c,30,s)),-1)=0)

 

şeklinde sonuç verecektir

bilgilerinize
0 0
Çok teşekkür ederim Serkan bey. Kolay gelsin
7,509 soru
7,511 cevap
4,405 yorum
8,750 kullanıcı