iki indikatör kodunu birleştirme

Question

merhaba  elimde 2 adet indicatör kodu var bunları kahin ile tarama yapmasını istiyorum nasıl birleştirebilrim. ben düz mantık 2 kodu da filtreye ekledi ama sonuç alamadım.

 

1. kod 

FMAL:=3;
SMAL:=5;
tmal:=fmal+smal; Fomal:=smal+tmal; Ftmal:=tmal+Fomal; Simal:=Fomal+Ftmal;
K1:=c;
K2:=MOV(K1,FMAL,W);
K3:=MOV(K2,SMAL,W);
K4:=MOV(K3,TMAL,W);
K5:=MOV(K4,Fomal,W);
K6:=MOV(K5,Ftmal,W);
K7:=MOV(K6,Simal,W);
cross(c,K7)

 

2.kod:

 

length:=20;
mult:=2;
lengthKC:=20;
multKC:=1.5;
useTrueRange:=input("Use TrueRange(KC)",0,1,1);
source:=C;
basis:=MOV(source,length,S);
dev:=multKC * STDEV(source,length);
upperBB:=basis+dev;
lowerBB:=basis-dev;
ma:=MOV(source,lengthKC,S);
range:=If(useTrueRange=1,ATR(1),H-L);
rangema:=MOV(range,lengthKC,S);
upperKC:=ma+rangema*multKC;
lowerKC:=ma-rangema*multKC;
sqzOn:=If(lowerBB>lowerKC AND upperBB<upperKC,1,0);
sqzOff:=If(lowerBB<lowerKC AND upperBB>upperKC,1,0);
noSqz:=If(sqzOn=0 AND sqzOff=0,1,0);

x1:=((HHV(H,lengthKC)+LLV(L,lengthKC))/2    +   MOV(C,lengthKC,S))/2;

val:=LINEARREG(source - x1,lengthKC);

Cross(val,0)

Answer 1

merhaba,

FMAL:=3;
SMAL:=5;
tmal:=fmal+smal; Fomal:=smal+tmal;
Ftmal:=tmal+Fomal;
Simal:=Fomal+Ftmal;
K1:=c; K2:=MOV(K1,FMAL,W);
K3:=MOV(K2,SMAL,W);
K4:=MOV(K3,TMAL,W);
K5:=MOV(K4,Fomal,W);
K6:=MOV(K5,Ftmal,W);
K7:=MOV(K6,Simal,W);
length:=20;
mult:=2;
lengthKC:=20;
multKC:=1.5;
useTrueRange:=1;
 source:=C;
basis:=MOV(source,length,S);
 dev:=multKC * STDEV(source,length);
upperBB:=basis+dev;
 lowerBB:=basis-dev;
 ma:=MOV(source,lengthKC,S);
 range:=If(useTrueRange=1,ATR(1),H-L);
rangema:=MOV(range,lengthKC,S);
upperKC:=ma+rangema*multKC;
lowerKC:=ma-rangema*multKC;
sqzOn:=If(lowerBB>lowerKC AND upperBB<upperKC,1,0); sqzOff:=If(lowerBB<lowerKC AND upperBB>upperKC,1,0);
noSqz:=If(sqzOn=0 AND sqzOff=0,1,0);

x1:=((HHV(H,lengthKC)+LLV(L,lengthKC))/2    +   MOV(C,lengthKC,S))/2;

val:=LINEARREG(source - x1,lengthKC);

cross(c,K7) and Cross(val,0)

 

formülünü deneyebilirsiniz,

bilgilerinize